top of page

The VL-CT45 is a simple low cost slider type design incorporating an LM guide rail as the actuator’s base. Component count is reduced, and the performance/cost ratio is excellent for the system which integrates an Animatics SmartMotor™ SM2315D as standard.

 

  • Linear ball screw system components
  • Brushless DC Servo Motor
  • Encoder
  • Amplifier
  • Controller with microprocessor
  • I/O, 5 V with 24 V available with accessory cable
  • Network capability
  • Firmware
  • Integrated brake option
  • Strokes of 50-200mm in 50mm steps
  • Available with Pulley Offset

MOOG ANIMATICS VL-CT45

  •  

    Motor Animatics SmartMotors Size 23
    Coupling Beam
    Ball Screw Leads 12 mm/rev
    Position Sensors Consult factory
    Stroke Lengths 50, 100, 150, and 200 mm
    Overall Length Stroke + 251.4 mm
    Over-Travel 0
    Unit Mass 1.45 + (stroke, mm)*0.0052 kg
    Unidirectional Repeatability 20 µm
    Bidirectional Repeatability 40 µm
    Accuracy 0.021/300 mm/mm
    Max Velocity 470 - 1000 mm/s (stroke dependent)
    Max Acceleration 0.3 G
    Payload Mass 5.6 kg
    Rated Velocity 400 mm/s
  •  DOWNLOAD 

     

bottom of page