Features:

 

• +12 to +80 VDC power supply input.
• 12 Amps Cont., 30 Amps Peak (2 seconds)
• 2 and 4 quadrant modes.
• Sinusoidal and Trapezoidal commutation modes.
• 20 kHz, 40 kHz and 80 kHz of programmable PWM frequency options.
• Current, Speed, Step and Direction modes of operation.
• USB Communications.
• Drive status diagnostics.
• +/-10V Analog command input.
• +/-10V Analog output (configurable).
• Digital direction input.
• Configurable ramp for current and speed.
• Brushless motor has halls-only operation mode for speed control, or encoder feedback mode for better performance at low speeds.
• Brush motor has encoder feedback mode or IxR compensation.
• Stepper motor has open-loop operation or closed-loop operation with encoder feedback.
• Step and Direction (closed-loop) available for Brushless DC, PMDC Brush and Stepper motors. Encoder required.
• Single step up to 256 microsteps openloop control for Stepper motor (1MHz max step rate @50% ± 10% duty-cycle).
• Integrated circuit for brake regeneration.
• +/- Travel limit inputs.
• 97% efficiency at full load.
• Selectable software protection options.
• Windows®-based set-up and tuning utility software included.

ElectroCraft CPP-A12V80A-SA-USB Universal Servo Drive

  • Output Power, Peak 2400 Watts
    Phase Current Peak 30 Amps (peak of sine)
    Phase Current Cont. 12 Amps (peak of sine)
    Output +12 to +80 VDC
    Output Frequency 20, 40, 80 kHz (selectable)