|
OEM Dynamics' HLD60 with Internal Rollers belt drive is available in a standard commercial grade and a high
precision grade. The HLD is comparable to a ball screw actuator in accuracy, but the HLD is
available with zero backlash inherent gear reduction built in.
Unlike conventional ball screw actuators, the HLD accuracy
extends to travel lengths from 100mm to 3.3 meters as a standard product. The cost however,
is far lower than commercial grade ball screws for travel in excess of 600 mm.
The HLD is commonly used instead of regular belt slides
because it is a low cost system due to the elimination of expensive gear reduction. The HLD
reduction is built in.
The HLD includes the Animatics SmartMotor™ model SM2315DT as
standard. Other Animatics SmartMotors in NEMA frame sizes 17 and 23 are available.
FEATURES:
 |
Linear belt system components |
|
|
Inherent gear reduction |
|
|
Brushless DC Servo Motor |
|
|
Encoder |
|
|
Amplifier |
|
|
Controller with microprocessor |
|
|
I/O, 5 V with 24 V available with
accessory |
 |
cable |
|
|
Network capability |
Please contact
our Sales Staff for pricing information on standard and custom items.
|
|
|
| OEM DYNAMICS HLD60 WITH INTERNAL ROLLERS ACTUATOR SPECIFICATIONS |
|
Motor |
Animatics SM2315D, SM2315DT, SM2316D, SM2316DT, SM2337D or
SM2337DT |
|
Coupling |
Flexible Jaw |
|
Displacement/rev |
2.5, 5, 10, 12.5 |
|
Position Sensors |
Optional Home & EOT limits |
|
Stroke |
100 - 600 mm in 50 mm steps
600 - 1000 mm in
100 mm steps
1000 - 4000 mm
in 200 mm steps
Custom lengths are available |
|
Overall Length |
Stroke + 284 mm |
|
Over-Travel |
26 mm |
|
Unit Mass |
2.3 + 0.0031 x (stroke, mm) + (motor mass, kg) |
|
Unidirectional Repeatability |
<20 µm |
|
Bidirectional Repeatability |
60-180 µm (belt tension dependent) |
|
Accuracy |
0.5 mm per 300 mm stroke |
|
Displacement/Rev |
2.5, 5, 10, or 12.5 mm/rev |
|
Linear Speed at 4200 RPM |
175, 350, 700, or 875 mm/s |
| Payload Mass |
45, 42, 18, or 13 kg |
|
back to top