|
FEATURES:
 |
Miniature Size (1.5" Diameter)
|
|
|
Large Hollow Bore Option (up to 0.750") |
|
|
High Temperature Option |
|
|
Up to 30,000 Cycles Per Revolution |
EPC's Model 755A Size 15 Accu-Coder™ is ideal for applications
requiring a small, high precision, high performance encoder. Approximately 1.5" in diameter and
1.5" long, it will fit where many encoders cannot. All metal construction and shielded ball bearings
provides years of trouble-free use.
A variety of blind hollow bore sizes are available. Large bores allow for shafts up to 0.750"
or 14 mm. Attaching directly to a motor is quick and simple with the innovative flex mount, first
developed by EPC. This industry standard mount eliminates couplings, increases reliability, while
reducing overall length and cost. Where critical alignment is required, a Slotted Flex (SF) is
available.
A perfect replacement encoder where high reliability is required.
Please contact
our Sales Staff for pricing information.
|
|
 |
|
EPC MODEL 755A INCREMENTAL THRU-BORE ENCODER
SPECIFICATIONS
|
| Max. Shaft Speed |
7500 RPM. Higher shaft
speeds may be achievable |
| Bore Size |
0.1875", 0.250", 0.3125",
0.375", 0.500", 0.625", 0.750", 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm, 14 mm |
| Electrical Connection |
18" cable (foil and
braid shield, 24 AWG conductors), 5- or 8-pin M12 (12 mm) in-line connector with 18" cable
(braid shield), 8-pin Molex, Terminal Block |
| Input Voltage |
4.75 to 28 VDC max
for temperatures up to 70° C
4.75 to 24 VDC for temperatures between 70° C to 100° C |
| Input Current |
100 mA max with no
output load |
| Output Format |
Incremental- Two square
waves in quadrature with channel A leading B for clockwise shaft rotation, as viewed from
the encoder mounting face. |
| Output Type |
Open Collector- 100
mA max per channel
Pull-Up- 100 mA max per channel
Push-Pull- 20 mA max per channel
Line Driver- 20 mA max per channel (Meets RS 422 at 5 VDC supply) |
| Mounting |
Flex, and Slotted
Flex Mounting |
|
back to top