|
FEATURES:
 |
Very high performance economical encoder |
|
|
Up to 12 pole commutation |
|
|
Sealing up to IP64 |
|
|
Low profile - less than 1.0" height |
 |
and 1.5" diameter |
EMC's Model 15T or 15H offers a high performance
feedback solution in a low profile package. This thru-bore(T) or hollow bore(H) encoder will
easily mount over shaft sizes up to 0.375" or 10 mm in diameter. Unlike modular or kit encoders,
the Model 15 utilizes an integral bearing set, and an innovative flexible mounting system which
is much more tolerant to axial misalignment or radial shaft run-out. The slotted flex mount provides
30 degrees of rotational adjustment for commutation or index pulse timing. Installation is quick
and easy!
For brushless servo mount motor applications,
EPC's Model 15 can be specified with three 120° electrical phase tracks to provide up
to 12 pole commutation feedback. The optional 120° C temperature capability allows servo motors
to operate at higher power outputs and duty cycles.
EPC's Model 15 provides stable and reliable
operation and is an excellent replacement for other manufacturers modular encoders where a high
performance solution is desired.
Please contact
our Sales Staff for pricing information.
|
|
|
|
EPC MODEL 15T/15H INCREMENTAL THRU-BORE
ENCODER SPECIFICATIONS
|
| Max. Shaft Speed |
8000 RPM |
| Bore Size |
0.1875" through 0.375",
5 mm through 10 mm |
| Electrical Connection |
18" cable (foil and
braid shield, 24 AWG conductors non-commutated, 28 AWG commutated), 5- or 8-pin M12 (12 mm)
in-line connector with 18" cable (braid shield) |
| Input Voltage |
5 VDC +10% Fixed Voltage,
12 VDC +10% Fixed Voltage, 4.75 to 28 VDC max for temperatures up to 85° C, 4.75 to 24 VDC
for temperatures between 85° to 100° C |
| Input Current |
100 mA max with no
output load |
| Output Format |
Incremental- Two square
waves in quadrature with channel A leading B for clockwise shaft rotation, as viewed from
the encoder mounting face. |
| Output Type |
Open Collector- 100
mA max per channel,Pull-Up- 100 mA max per channel, Push-Pull- 20 mA max per channel, Line
Driver- 20 mA max per channel (Meets RS 422 at 5 VDC supply) |
| Mounting |
Flex, and Slotted
Flex Mounting |
|
back to top