Carson Mfg. 17 Precision Planetary Gearhead

Carson Mfg. Precision Planetary Gearheads

The Precision Planetary (PL) line of gearheads is Carson Mfg.'s high end line designed for the most strenuous applications.

Features include:

Dynamic radial shaft seal at the input and output
Enclosure rating = IP65
Operating temperature range = -20°F to 250°F
Aluminum hard anodized rear and front brackets with surface hardnesses of 60 rockwell
Powder coated steel ring gear
Quality sealed radial ball bearings
Stainless steel output shaft
Hardened precision gearing throughout
Precision clamp on pinion with four clamping screws to eliminate slippage
     

Click on links below to view mechanical outline in PDF format - Adobe Acrobat Reader required

CARSON 17 PRECISION PLANETARY SPECIFICATIONS

Construction

Type

Ratio

Backlash:

Standard

(arc-minutes)

Backlash:

Low Backlash

(arc-minutes)

Efficiency

Weight

(lbs)

Maximum

Tested

Input rpm

Single Stage 3:1 to 10:1 6 3 90% 1.00 5000
Double Stage 16:1 to 100:1 10 7 85% 1.60 5000
Peak Torque:  15% above continuous rating.  Note:  Repeated peak torque loading may cause failure.

 

Click on links below to view drawing in PDF format - Adobe Acrobat Reader required

Part

Number

Ratio

Continuous Output

Torque at

1500 rpm Input

(in-lbs)

Continuous Output

Torque at

3500 rpm Input

(in-lbs)

Continuous Output

Torque at

5000 rpm Input

(in-lbs)

Gearhead Inertia

at Input

(lb-in-sec2)

17PL003 3:1 243 169 137 3.25 x 10-5
17PL004 4:1 220 166 140 1.60 x 10-5
17PL005 5.5:1 197 159 139 1.10 x 10-5
17PL007 7:1 180 151 135 9.56 x 10-6
17PL010 10:1 143 126 116 8.36 x 10-6
17PL016 16:1 304 276 259 1.59 x 10-5
17PL022 22:1 311 289 275 1.10 x 10-5
17PL028 28:1 394 296 285 9.54 x 10-6
17PL040 40:1 319 306 296 8.35 x 10-6
17PL049 49:1 230 224 219 9.44 x 10-6
17PL055 55:1 264 256 251 8.31 x 10-6
17PL070 70:1 231 226 224 8.30 x 10-6
17PL100 100:1 176 174 173 8.29 x 10-6

Home     Top of Page     Back to Carson Index     Ordering Info