AMP's PDO 2035 is a step drive packaged in a rugged steel case painted black with white epoxy silk screen. Integral heat sink, mounting brackets, switch covers and connectors are included with each drive. The drive has been matched with nine recommended NEMA 11, 14, 17 & 23 motors in order to create a complete stepper motion solution.

FEATURES:

	AC input 110 v or 220 V switch selectable,
	50-60 Hz
	DC bus voltage 28 VDC full load, 35 VDC
	nominal
	Switch selectable motor current from
	0.125-2.0 amps/phase
	Full and half step switch selectable
	Automatic 50 idle current reduction,
	defeatable
	Optically isolated inputs/outputs
	Speed, direction, enable: optically isolated,
	5-24 V logic
	Tach output isolated: Darlington
	phototransitor one pulse per motor step
	Internal pot
	Speed 10-1,200 steps/sec./sec. or 100-
	12,000 (switch selectable)
	Accel/decel 750-200K steps/sec./sec.
	External speed pot terminal type, 1k-10k
	ohms
	70 watts of usable power
	Pluggable, screw terminal connectors
	Dual H-bridge, pulse width modulated
	amplifier switching at 20-30 KHz
	Ideal for 4, 6 or 8 leaded step motors NEMA
	sizes 11, 14, 17 and 23

Please contact our Sales Staff for pricing information.