AMP's BLuAC5 hardware features a powerful digital signal processor (DSP) combined with an efficient IGBT PWM amplifier. When combined with the BLuAC5’s advanced, yet easy to tune position loop and velocity and acceleration feed-forward, a system capable of extremely high performance results assuring success in even the most demanding of applications.

All BLuAC5 drives are capable of running brushless, brush and linear type motors. A timing wizard automatically configures the encoder and commutation timing for virtually any brush or brushless DC motor.

FEATURES:

	BLuAC5-S and BLuAC5-Q can be commanded
	via +/-10VDC analog Signal or PWM in
	torque or velocity mode
	BLuAC5-Si can be programmed for stand-
	alone operation with the easy to use Si
	Programmer™ Windows software (software
	and programming cable included)
	BLuAC5-Q can be programmed for stand-
	alone operation with Q Programmer™
	Windows software (software and
	programming cable included)
	All BLuAC5 drives can be operated in real
	time from a host PC or PLC using the Si
	Command Language (SCL), via RS232 or RS
	485
	Drives Brushless sinusoidal, Brushless
	trapizoidal, Brush or Linear type motors
	2 to 24 Pole Brushless motor compatibility
	Torque, Velocity and Positioning modes
	90-240 VAC Single Phase or 3 Phase input
	Continuous current of 5 A, peak currents to
	15 A
	Speeds to 8000 rpm. Motor and load
	dependent
	16 kHz precision PWM amplifier
	Compact size (7.75 x 2.75 x 4.75 inches)

Please contact our Sales Staff for pricing information.