AMP's 7080i is a programming step motor driver suitable for a wide range of motion control applications. It includes a sophisticated controller integrated with a 560-watt microstepping amplifier.

The 7080i includes 8 programmable inputs for triggering, branching, position sensing and end of travel detection. Three optically isolated programmable outputs can send signals to other electronic devices and activate relays.

The 7080i is a PC board mounted on an aluminum angle heat transfer chassis. Drive dimensions are 2" by 3" by 6".

FEATURES:

	Programmable for stand alone operation with
	AMP's Si Programmer™ Windows software
	(software and program cable included)
	Can be operated in real time from a host PC
	or PLC using AMP's Si Command Language™
	Can be networked with all other Si™
	products via AMP's SiNet™ Hub
	DC bus voltage 24-80 VDC motor supply
	(including ripple)
	Software selectable from 0.8-7.0
	amps/phase motor current
	Software selectable Step resolutions from
	2,000 to 50,800 steps per revolution
	Software selectable idle current reduction
	0%, 25%, 50% or 100%
	8 user programmable inputs
	3 optically isolated 24 VDC outputs
	Short circuit and over temperature
	protection
	Communication via RS232
	560 watts of usable power
	Screw terminal connector blocks for power
	and motor, Wago cage clamp connector for
	I/O, RJ11 for RS232 port
	MOSFET, dual H-bridge, inaudible PWM
	amplifier
	3 state pulse width modulated current
	control, switching at 20-30 KHz
	Optional operator terminal (MMI) either
	standard or backlit
	Drives 4, 6 or 8 lead size 11, 14, 17, 23 and
	34 step motors
	CE compliant

Please contact our Sales Staff for pricing information.