AMP's 3540i is a programming step motor driver suitable for a wide range of motion control applications. It includes a sophisticated controller integrated with a 140 watt microstepping amplifier.

The 3540i includes AMP's easy to use Si Programmer™ Windows software for the rapid development of stand-alone motion control programs. The 1240i can also be commanded in real time from a host PC or PLC, using the Si Command Language. For multi-axis applications, up to eight Applied Motion Si™ drives (stepper or servo) can be networked using a single SiNet™ Hub.

The 3540i includes 8 optically isolated programmable inputs for triggering, branching, position sensing and end of travel detection. Three optically isolated programmable outputs can send signals to other electronic devices and activate relays.

FEATURES:

	Programmable for stand alone operation with
	AMP's Si Programmer™ Windows software
	(software and program cable included)
	Can be operated in real time from a host PC
	or PLC using AMP's Si Command Language™
	Can be networked with all other Si™
	products via AMP's SiNet™ Hub
	DC bus voltage 12-42 VDC motor supply
	(including ripple)
	Software selectable motor current from
	0.2-3.5 amps/phase motor current
	Software selectable step resolutions from
	2,000 to 50,800 steps per revolution
	Software selectable idle current reduction
	0%, 25%, 50% or 100%
	8 user programmable inputs
	3 optically isolated 5-24 VDC outputs
	Communication via RS232 or optional RS485
	140 watts of usable power
	Screw terminal connector blocks for power
	motor and I/O, RJ11 for RS232 port
	MOSFET, dual H-bridge, inaudible PWM
	amplifier
	3 state pulse width modulated current
	control, switching at 20-30 kHz
	Optional RS485 and encoder input board
	Optional operator terminal (MMI) either
	standard or backlit
	Drives 4, 6 or 8 lead size 11, 14, 17, 23
	or 34 step motors
	CE and TUV compliant

Please contact our Sales Staff for pricing information.