AMP's 1035D step drive consists of two stepper drives that can operate in full or half step mode.  Each driver can be individually controlled via its step and direction inputs. Each driver includes an automatic feature to lower motor current any time the motor is left at rest for more than one-half second.

The amplifiers regulate motor current by chopping at a constant, inaudible frequency.  Phase current for each axis is independently adjustable by front panel potentiometers.

FEATURES:

	Accepts 12-35 VDC power supply
	Adjustable motor current: 0 to 1.0
	amps/phase
	Full or half step (jumper selectable)
	Compact size (1.0 x 2.4 x 3.55 in.)
	Mounts on DIN rail
	Optically isolated 5 - 24V step and direction
	inputs can be configured for sinking or
	sourcing logic
	Automatic idle current reduction
	Drives 4, 6 or 8 lead step motors, sizes
	11 -23
	Compatible step motors available from stock
	Lightweight, rugged molded case
	Pluggable, screw terminal connectors
	CE compliant

Please contact our Sales Staff for pricing information.