AMC has a variety
of power supplies to power your servo drive. Sizes range from 300W continuous to over
35kW peak power.
For safe and reliable operation, either the drive or the power
supply must have isolation. In the drive, isolation takes the from of optical isolators that
isolate the signal ground from the power ground. In the power supply, isolation takes the form
of an isolation transformer that isolates the input AC from the power supply output. Selecting
the correct power supply is as simple as specifying the correct voltage and picking a model that
can supply enough power. If the drive datasheet does not specify optical isolation then you must
use a power supply with an isolation transformer.
Please
contact our Sales Staff for pricing information
on standard and custom items.
Click
on model numbers below to view more info & drawings in PDF format - Adobe Acrobat Reader required
'-LV' is a low voltage
option. Built-in shunt regulator set to 190VDC
'-L' power supply is mounted to an
'L' shaped bracket fro smaller size. With this option space is not provided to mount drives
to the power supply. Add '-L' at the end of these part numbers to indicate the '-L' option,
ex. PS16L30-L